Universal laser Bridge device for embroidery machineS

The advantages of  GMI Laser II compared to other laser systems.

button5.gif (1007 byte)   GMI Laser II can work simultaneously with up to two embroidery machines, one sampling machine and GMI Plotter and/or GMI Roller . button5.gif (1007 byte)  

 

GMI Laser II gets rid of, or reduces, all burned edges of the cut piece, thanks to its high cutting speed. 
button5.gif (1007 byte)   GMI Laser II is much faster, as the laser beam is directed by mirrors with electromagnetic motors. Cutting results therefore to be up to 20 times and engraving up to 50 times faster. button5.gif (1007 byte)  

 

GMI Laser II is equipped with a smoke suction system and a protective bell to guarantee complete safety to the operator.
button5.gif (1007 byte)   GMI Laser II allows for setting up different laser power, speed and number of passages for each cut, which proves particularly useful when working with different materials on the same sample. button5.gif (1007 byte)  

 

GMI Laser II always works with the highest productivity. In standard systems, the maximum speed is limited to the movement of the x and y-axis stepping motors of the pantograph. That way, you have to reduce the laser power, in order to avoid burnings. GMI Laser II can work with the maximum laser power (100%). By controlling the speed, you will be able to reach the best results.
button5.gif (1007 byte)   GMI Laser II cuts with much higher precision (1/100 mm instead of 1/10 mm). Traditional systems keep in fact the laser still and move the pantograph, when cutting. Cutting results therefore unclean and not very precise. button5.gif (1007 byte)   GMI Laser II is very simple to use, thanks  to its laser driver control software. It is in fact very easy to set the parameters of laser cutting: power, speed, number of passages,....
     

| Home |

SAVMIK - Via Terni, 84 - 25085 GAVARDO (BS) - ITALY -
Tel. ++39
0365 374937

e-mail: silverio@savmik.com  - Web Pages: www.savmik.com